Model: 600YP, 800YP, 1000YP
Part Description:
Performance characteristics: The skeleton material is made of synthetic fiber dipped canvas (EP), the warp direction is low shrinkage polyester, the weft direction is nylon, and a layer of wearable canvas is added on the contact surface between the lifting belt and the head wheel, which is suitable for food and grain. A high performance belt for industry.
Description
Recommendations:
1. It is mainly suitable for lifting non-oily and non-biological additives in bulk or small granular materials under normal temperature, non-humidity and corrosive environment;
2, lifting belt width ≥ 500mm and lifting height ≥ 35 meters, can be customized according to the strength requirements of the edge reinforcement lifting belt;
3, according to the requirements of working conditions, customizable temperature, corrosion and antistatic polyester lifting tape;
4. In order to improve the transmission efficiency and reduce the abnormal wear of the lifting belt, it is recommended to use the rubberized head wheel.
Supply features:
1, no need to order the whole volume, can be customized according to customer requirements length and width;
2, can provide bucket hole installation hole punching service, convenient for customers to install and use.
Full thickness performance parameters:
model | Core structure | Full thickness longitudinal tear strength (N/mm) | Constant load elongation (≤%) | Thickness (mm) | Recommended minimum head wheel diameter (Φ) | |
Drum | Rubber drum | |||||
600YP | 3EP+1CC | 600 | 1.6 | 5.0+0.2 | 360 | 300 |
800YP | 4EP+1CC | 800 | 6.5+0.3 | 500 | 400 | |
1000YP | 5EP+1CC | 1000 | 8.0+0.5 | 600 | 800 |
Interlayer adhesion strength performance parameters:
project | Cloth floor | Between the cover rubber and the core |
All pattern average (N/mm) ≥ | 4.5 | 3.5 |
The lowest value of all patterns (N/mm) ≥ | 3.9 | 2.6 |
Covering plastic physical and mechanical performance parameters:
Tensile strength (Mpa) | Elongation at break (%) | Wear amount (mm3) | Coefficient of friction (with steel head wheel) | Coefficient of friction (with rubberized head wheel) |
18 | 420 | 150 | 0.75 | >1 |