PVC Core Lifting Belt

Model: PVC480, PVC680, PVC880, PVC1080
Part Description:

The PVC whole core lifting belt is made of polyester and cotton multi-layered interwoven fabric as the core, impregnated with PVC paste resin at high temperature, and the surface layer is adhered with PVC surface glue. It has flame retardant and antistatic properties. Core lifting strap.

Description

Features:

1. The core is multi-layered and intertwined. Compared with the multi-layer rubber hoisting belt, there is no multi-layer structure. The core of the same cross-section is in the stretched or compressed state. Uniform, no surface peeling and interlayer peeling, ensuring a good running track when used, and not easily hitting the cylinder.

2. The whole core has a dense integrity after being immersed and plasticized, which ensures its excellent lifting ability, and the tear resistance and the anti-thread pull-through performance are better, which makes the connection between the bucket and the lifting belt stronger.

3. PVC’s inherent oil and chemical resistance makes it more resistant to oil, corrosion, moisture and abrasion than rubber lifting belts.

4. It has light body, firm structure, low driving power, flame retardant and antistatic performance, which makes the operation safety of the hoist more effective.

Product specifications and performance parameters:

 

specification colour Rated longitudinal tensile strength (N/mm) Thickness (mm) Ambient temperature (°C) Rated load elongation (%) Recommended minimum head wheel diameter (φ)
PVC480 green 520 4.0~4.2 -35~+90 0.60 100
PVC680 680 5.3~5.8 0.70 150
PVC880 880 6.8~7.1 0.70 250
PVC1080 1080 8.5~9 0.70 350

 

Covering glue performance:

 

project index
Tensile strength Mpa≥ 15.00
Elongation at break % ≥ 300.00
Wear mm3≤ 100.00
Conductivity MΩ≤ 300.00

 

PVC whole core lifting belt and rubber lifting belt comparison test report:

 

Product Name: PVC whole core lifting belt / enhanced lifting belt Specification model: PVC880/800YP
Test judgment basis: Refer to “Rubber or plastic lifting belt HG/T2577-2006”
test result
project test value Test Methods
PVC880 800YP
Full thickness performance Longitudinal tensile strength N/mm 955 800 GB/T3690-2009
Constant load elongation % 0.70 1.6 GB/T3690-2009
Longitudinal stretch rate% twenty four twenty four GB/T3690-2009
Interlayer adhesion strength N/mm 9 4.5 GB/T532-2008
Covering glue performance Anti-screw pull-through strength N 11250 8500 “Tape Tensile Resistance Test Requirements”
Low temperature resistance No delamination and surface cracking Refer to GB/T7758-2002
Elongation at break % 450 420 GB/T532-2008
Wear amount mm3 80 150 GB/T1689-2014
Shore hardness Sha 70 60-65 (glue) GB/T531-99
Coefficient of friction (with steel) 0.68 0.75 Refer to ISO21182:2005
Coefficient of friction 
(with rubber)
0.86 Adsorption >1 Refer to ISO21182:2006
Oil resistance (volume expansion rate)% 3 20 “Body Volume Expansion Test Method”
Acid and alkali resistance (volume expansion ratio)% 0.8 5.2 “Body Volume Expansion Test Method”
test results    In summary, for grain, oil and feed processing, the overall performance of PVC core lifting belt is much better than rubber lifting belt. PVC imported core lifting belt is used in imported equipment imported from domestic large grain oil and feed processing enterprises.